Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)

£148.61
20% VAT incl.


  • Model:PH14/C/10
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 10 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 154mm
Height (BH) - 12.5mm Approx.
Weight: - 175g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA
Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
4 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)11 x ERATAC Bubble Level [T0940-0002]4 x Schultz & Larsen Professional Bipod by Spartan4 x Krieghoff "K" Logo Cap Red & White2 x Krieghoff "K" Bobble Beanie - Black1 x Krieghoff K-80 Sport Logo Cap Grey & White3 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Krieghoff "K" Logo Cap Grey & White1 x Krieghoff "K" Bobble Beanie - Burgundy3 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended3 x Contessa Picatinny Rail - H&K SLB 2000 (0 MOA)3 x Krieghoff Elite Canvas Gun Slip5 x Krieghoff Fine Leather Gun Case (K-80 Parcours)3 x ERATAC 34mm Ring with UNI-Interface [03680-5734]8 x Clearance Americase Cordura Case Cover (34.5x12x5")2 x Krieghoff "K" Bobble Beanie - Green2 x Krieghoff "K" Bobble Beanie - Royal Blue6 x Clearance Americase Cordura Case Cover (32x11x3")2 x Krieghoff "K" Bobble Beanie - Heather Grey2 x Krieghoff "K" Bobble Beanie - Navy9 x Black Barrel Case (83cm Internal)4 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)5 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor for VFG Rods (Spare)8 x AimZonic Compact Camo Sound Moderator1 x Gerber Dime Multi-Tool (Lime)3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Used Schultz & Larsen Rings 30mm, Med (11mm BH)4 x Recknagel Steel Stock Trap Door1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)2 x Krieghoff Pro Choke Box1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Krieghoff "K" Denim Cap - Navy1 x Ex-Display Silva Ranger Compass4 x Recknagel Standard Banded Swivel Ring [22620-....]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Clearance Americase Cordura Case Cover (37x12x4.5")2 x Jones Gun Nut Kit1 x Clearance Americase Cordura Case Cover (34.5x9x4.5")4 x Recknagel Barrel Banded Front Ramp [12530-....]7 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Gerber Descent - Folding Knife1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)3 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (012)2 x Ex-Display Gerber GDC Zip Hex1 x Bauer ED 10x42 Binoculars1 x Gerber Myth Series Fixed Saw1 x Garant TORX Screwdriver TORX15 (15 x 80)3 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount7 x Ebony & Brass 20 Bore Snap Caps1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Garant TORX Screwdriver TORX10 (10 x 70)1 x Krieghoff Achievement Badge 100/3001 x Recknagel Replacement Polyform Lever [00088-5700]2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x ERATAC ACI Bubble Level [T0940-0000]2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]3 x Badge - Cob Bronze1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA) Adjustable2 x K-80 Barrel Weight Balance System1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)6 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]2 x Gerber Gator Combo Replacement Saw2 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]4 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]2 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff "K" Mesh Cap - Navy2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)2 x AA x 4 Camelion Plus Alkaline Batteries2 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Gerber Metolius Pocket Folder1 x Briley 20b Speed Wrench - For Krieghoff3 x Krieghoff Navy Canvas Gun Slip2 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope3 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Krieghoff 2009 Badge (Collectors Badge)2 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Savage Long (10 MOA)1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]2 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Bauer HD 8x56 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x Schmierfix Grease by Liqui Moly2 x Schultz & Larsen Take Down Rifle Case2 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Sauer 100/101 (20 MOA)1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Krieghoff 2011 Badge (Collectors Badge)1 x Krieghoff 2015 Badge (Collectors Badge)2 x Krieghoff Trigger Screw1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Bauer HD 8.5x50 Binoculars1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)2 x CR2032 Camelion Lithium Battery1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Bauer HD 8x42 Binoculars1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)3 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Weatherby Vanguard Long (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Bauer ED 8x42 Binoculars1 x Krieghoff K-Diamond Beanie - Burgundy1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Krieghoff C-Clips (E-Clips)1 x Contessa Quick Release Mount for Zeiss Rail1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Front Sight Bead (Standard)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x Contessa Picatinny Rail - Haenel Jager 10 (0 MOA)1 x Krieghoff Brass Mid Sight Bead1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Krieghoff K-Diamond Beanie - Navy1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Chamber Brush 20b1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Jones Original Pad Adjuster1 x Recknagel Front Sight Bead Red [11444-0300]1 x ERATAC KeyMod Adaptor for QD Swivel Adaptor [T4510-0000]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff "K" Logo Cap Black & White1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Krieghoff Comb Wrench (T-Handle)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (20 MOA) Adjustable1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff Extended Pillars for Adjustable Comb1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]
Manufacturers
Useful Information