Contessa Satin Chromed Picatinny Rail - Sako 85 Med (0 MOA)

£148.61
20% VAT incl.


  • Model:PH13/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Medium
With 0 MOA
Fits Sako Models: 75* / 85

Rail Length: - 144mm
Height (BH) - 12.5mm Approx.
Weight: - 165g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 84mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA
Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Schultz & Larsen Professional Bipod by Spartan1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff Pro Choke Box1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Krieghoff Trigger Screw1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Schultz & Larsen Red Recoil Pad1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Picatinny Rail - Browning A Bolt 3 Short (0 MOA)1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Krieghoff Spares Kit1 x Krieghoff Navy Canvas Gun Slip1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Jones Gun Nut Kit1 x Krieghoff Shooter's Towel - Green1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Recknagel Picatinny Bases - Schultz & Larsen1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x AimZonic Compact Camo Sound Moderator1 x Silva Map Measurer (Mechanical)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Black Leather Shell/Cartridge Pouch1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)2 x Schultz & Larsen T-Handle Wrench (Torx 20)
Manufacturers
Useful Information