Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)6 x Krieghoff HIVIZ Pro Sights3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set5 x Krieghoff Pro Choke Box2 x Krieghoff K80 Speed Wrench for Factory Chokes4 x Krieghoff Trigger Screw1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Woven Fabric Patch4 x Schultz & Larsen Professional Bipod by Spartan2 x Anschütz Biathlon Harness2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm5 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm3 x Krieghoff Brass Front Sight Bead2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Schmierfix Grease by Liqui Moly1 x Krieghoff "K" Mesh Cap - Black2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Jones Original Pad Adjuster2 x Recknagel SOB01 Silencer (Standard Thread)2 x Recknagel SOB3D Silencer (Standard Thread)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)2 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel SOB3D Silencer (ERA LOC)2 x Krieghoff Extended Pillars for Adjustable Comb2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x AimZonic Plus Camo Sound Moderator3 x AimZonic Compact Camo Sound Moderator3 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x Schultz & Larsen Venom Moderator (Over Barrel)2 x Jones Thru-the-Pad Adjuster2 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]2 x Recknagel Folding Front Sight Bead Ivory [11240-3565]5 x Black Barrel Case (83cm Internal)2 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]4 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Grip Cap Domed Blank [24000-0400]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Krieghoff Front Sight Bead (Standard)2 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]2 x Krieghoff Navy Gun Slip1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]2 x Krieghoff Front Sight Bead (Small)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]2 x Krieghoff Brass Mid Sight Bead3 x Krieghoff Sight Bead Blanking Screw3 x Recknagel Ring Base for Rear Sight [16550-0185]2 x Recknagel Safety for Mauser K98 [30100-5000]1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x K-80 Standard Trigger - Steel1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Bauer Outdoor 8x21 Binoculars1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount4 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Black Leather Shell/Cartridge Pouch1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x Krieghoff Stock Removal Wrench1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Bear Grylls Scout Essentials Kit1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x K-80 Stock Weight for Balance System1 x Bauer HD 8x56 Binoculars1 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Ruger American (0 MOA)4 x Krieghoff Comb Wrench (T-Handle)2 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount2 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff "K" Collectors Badge1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ebony & Brass 20 Bore Snap Caps1 x Starkie Blue (A.K.A Smurf Poo)3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff .410g Choke Wrench1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x K-80 Barrel Weight Balance System2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Factory Hanger Pin1 x K-80 Forward Position Trigger - Black Titanium1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x K-80 Standard Trigger - Titanium1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Hi Viz - How to Become a Better Shooter1 x Krieghoff Spares Kit1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel Grip Cap Compartment1 x Recknagel Sling Swivel Loop, Wood Screw [21410-9020]1 x Krieghoff K-Diamond Beanie - Grey1 x Recknagel Steel Stock Trap Door1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff 12b Choke Wrench1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Front Sight Bead Red [11444-0300]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x WalkStool Set of Spare Red Spring1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Teague Precision Choke Key1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Contessa Picatinny Rail - CZ 550 Standard (20 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13551 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Safety Catch Locking Screw Wrench1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)
Manufacturers
Useful Information