Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)

£148.61
20% VAT incl.


  • Model:PH14/C/20
Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 20 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 154mm
Height (BH) - 12.5mm Approx.
Weight: - 175g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip3 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights4 x Krieghoff HIVIZ Pro Sights2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable2 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Sight Bead Blanking Screw1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Jones Gun Nut Kit1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x AimZonic Compact Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel SOB3D Silencer (Standard Thread)1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff Stock Removal Wrench1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for VFG Rods Brass1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Complete Set for .1771 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x K-80 Standard Trigger - Steel2 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff .410g Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Recknagel Front Ramp [12000-0000]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]2 x Krieghoff 12b Choke Wrench2 x Custom Rifles of Great Britain by Bruce Potts1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x K-80 Standard Trigger - Titanium1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Black Barrel Case (83cm Internal)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)
£26,076.75
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA) Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable