Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH12N/C/20
Contessa Satin Chromed Picatinny Rail for Sako 85 Short
With 20 MOA
Adjustable to fit various action sizes
Fits Sako Models: 75* / 85

Rail Length - 150mm
Distance between Bases - 66mm - 90mm
Height (BH) - 12.5mm
Weight: - 170g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrenches,
- Fitting Screws all included



Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 66 - 90mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).

Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 66mm and 90mm apart, the rail will be able to fit.

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

Gerber Metolius Pocket Folder
Gerber Metolius Pocket Folder
£10.00
20% VAT incl.
1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Jones Original Pad Adjuster2 x Schmierfix Grease by Liqui Moly2 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Jones Thru-the-Pad Adjuster1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Ebony & Brass 20 Bore Snap Caps1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Jones Gun Nut Kit1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)2 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Factory Hanger Pin1 x Silva Dine Duo Kit - Purple/White1 x Silva Map Measurer (Mechanical)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)2 x Krieghoff "K" Collectors Badge1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Badge - Cob Bronze1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x MSA Sordin - Hygiene Kit - Foam Seals1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]2 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)
Manufacturers
Useful Information