Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)

£148.61
20% VAT incl.


  • Model:PH14/C/20
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 20 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 154mm
Height (BH) - 12.5mm Approx.
Weight: - 175g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Krieghoff "K" Denim Cap - Navy2 x Krieghoff K-Diamond Beanie - Grey2 x Krieghoff K-Diamond Beanie - Heather Grey1 x Krieghoff K-80 Sport Logo Cap Black & Red3 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)4 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - CZ 527 (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Sight Bead Blanking Screw3 x Krieghoff "K" Denim Cap - Grey2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Krieghoff K-Diamond Beanie - Navy1 x Krieghoff "K" Logo Cap Navy & White3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K-Diamond Beanie - Burgundy2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes3 x K-80 Stock Weight for Balance System2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff .410g Choke Wrench2 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff 28b Choke Wrench2 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Trigger & Selector Locking Wrench2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Factory Hanger Pin3 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff 12b Choke Wrench2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Krieghoff Extended Pillars for Adjustable Comb3 x Krieghoff Spares Kit2 x Krieghoff Stock Removal Wrench2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints2 x Krieghoff Trigger Screw2 x Krieghoff Pro Choke Box1 x Teague Precision Choke Key1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)3 x Krieghoff Woven Fabric Patch1 x Krieghoff "K" Collectors Badge2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x Krieghoff Ejector Ball and Spring1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Black Leather Shell/Cartridge Pouch2 x Black Barrel Case (83cm Internal)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm4 x Krieghoff Brass Front Sight Bead1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)3 x K-80 Barrel Weight Balance System2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x MSA Sordin - Hygiene Kit - Foam Seals3 x Krieghoff HIVIZ Pro Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x Schmierfix Grease by Liqui Moly2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff 2013 Badge (Collectors Badge)1 x Jones Gun Nut Kit1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x Krieghoff Shell Bag1 x Jones Original Pad Adjuster1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Schultz & Larsen Professional Bipod by Spartan2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Anschütz Biathlon Harness2 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Front Sight Bead (Standard)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Bauer Outdoor 10x25 Binoculars1 x ERATAC Bubble Level [T0940-0002]1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Gold Plated1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Titanium1 x K-80 Standard Trigger - Black Titanium1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Winchester 3" Folding Knife1 x EX Demo - Gerber Metolius Pocket Folder1 x AimZonic Plus Camo Sound Moderator1 x AimZonic Compact Camo Sound Moderator2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Complete Set for .1771 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Adaptor for VFG Rods Brass2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser
Manufacturers
Useful Information