Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Krieghoff 12b Choke Wrench1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Stock Removal Wrench1 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Professional Bipod by Spartan1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff HIVIZ Pro Sights1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Teague Precision Choke Key1 x Krieghoff Trigger Screw1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Browning BAR Euro Rail for Quick Release Mount
Manufacturers
Useful Information