Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Krieghoff Trigger Screw1 x Krieghoff Spares Kit1 x Krieghoff HIVIZ Pro Sights1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Magnetic Felt Clamps for Vices - 80mm2 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Schmierfix Grease by Liqui Moly1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Recknagel Grip Cap Compartment1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable
Manufacturers
Useful Information