Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)4 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Anschütz Biathlon Harness1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Navy Gun Slip1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)3 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Ejector Ball and Spring2 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ebony & Brass 20 Bore Snap Caps2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail3 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x Schmierfix Grease by Liqui Moly4 x Black Barrel Case (83cm Internal)2 x Contessa QD Mount for Blaser for ATN X-Sight II2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail3 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x K-80 Barrel Weight Balance System1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Spare Ring-to-Base Screws1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail2 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x WalkStool Spare Leg Joints1 x Krieghoff "K" Mesh Cap - Black1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)2 x Krieghoff "K" Logo Cap Navy & White1 x Contessa Quick Release Picatinny Rail1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x K-80 Stock Weight for Balance System1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x AA x 4 Camelion Plus Alkaline Batteries1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff K-Diamond Beanie - Navy1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Black Leather Shell/Cartridge Pouch1 x Jones Gun Nut Kit1 x Gerber Gator Combo Replacement Saw1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Gerber Descent - Folding Knife1 x Ex-Demo K-80 Steel 12b Hanger #51 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Silva Map Measurer (Mechanical)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (10 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Silva Dine Duo Kit - Purple/White1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Gerber Dime Multi-Tool (Lime)1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Shell Bag1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Winchester 3" Folding Knife1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Winchester 70 Short (0 MOA)1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Jones Original Pad Adjuster1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Picatinny Rail - Sako A7 X-Short (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)
Manufacturers
Useful Information