Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Anschütz Biathlon Harness1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Black Leather Shell/Cartridge Pouch1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Black Barrel Case (83cm Internal)2 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Recknagel Blank 12mm Eurorail - 150mm1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Bauer Outdoor 8x21 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x CR2032 Camelion Lithium Battery1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Recknagel Picatinny Bases - Schultz & Larsen1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x VFG Adaptor for VFG Rods (Spare)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Hi Viz - How to Become a Better Shooter1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]
Manufacturers
Useful Information