Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Gerber New Myth Series Pocket Folder1 x Gerber Descent - Folding Knife1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Recknagel Front Sight Bead White [11442-0300]1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor2 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Winchester 70 S Euro Rail Base for QR Mounts1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)2 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x VFG Adaptor for VFG Rods (Spare)2 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Picatinny Rail 200mm Blank No Slots, Steel [..0000]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Krieghoff 2015 Badge (Collectors Badge)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel Picatinny Rail 204mm Blank, Alu [..0120]1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Schmierfix Grease by Liqui Moly2 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable2 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Silva Map Measurer (Mechanical)1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Contessa Picatinny Rail - Winchester 70 Long (10 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Recknagel Weaver Bases - Steyr-Mannlicher (Old Models) [..-3051]1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Sauer 100/101 New [..-302Y]
Manufacturers
Useful Information