Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]3 x Ex-Demo K-80 Steel 12b Hanger #51 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Walkstool Steady1 x Badge - Cob Bronze1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Custom Rifles of Great Britain by Bruce Potts3 x Gerber Dime Multi-Tool (Lime)3 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Bauer HD 8x42 Binoculars1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]3 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)3 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x AimZonic Plus Camo Sound Moderator2 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]3 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)2 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x VFG Adaptor for VFG Rods Brass2 x Recknagel Barrel Banded Front Ramp [12530-....]2 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Bauer ED 10x42 Binoculars1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x Gerber Balance Multi-Tool Black2 x Gerber Octane Multi-Tool Red3 x Recknagel Weaver Bases - Sauer 100/101 New [..-302Y]2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)2 x Contessa Quick Release Mount for Swarovski Rail1 x EX Demo - Gerber Metolius Pocket Folder1 x CR2032 Camelion Lithium Battery1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Silva Dine Duo Kit - Purple/White1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Recknagel Hood for Front Ramp [13020-1580]1 x Schultz & Larsen Red Recoil Pad1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Krieghoff 2011 Badge (Collectors Badge)1 x Krieghoff 2015 Badge (Collectors Badge)2 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel Stock Shield - Oval Contoured1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Front Ramp [12000-0000]1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff 2009 Badge (Collectors Badge)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel1 x VFG Wipe Length Stopper & Guide - Shotgun
Manufacturers
Useful Information