Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Woven Fabric Patch2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x VFG Magnetic Felt Clamps for Vices - 125mm3 x Gerber Metolius Pocket Folder2 x Winchester 3" Folding Knife1 x Gerber Basic Fixed Blade Serrated1 x Schmierfix Grease by Liqui Moly2 x Gerber Octane Multi-Tool Red1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)3 x Gerber Myth Series Fixed Saw2 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x Gerber Gator Combo Replacement Saw1 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Jones Original Pad Adjuster1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Replacement Polyform Lever [00088-5700]2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Gerber Paraframe II Fine Edge Knife1 x Ex-Display Gerber GDC Zip Hex1 x DMT Diafold Magna-Guide Kit1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Krieghoff "K" Collectors Badge1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Picatinny Rail Krico 700/900/902*, Alu [..0006]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Mauser K98 [57080-3010]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)1 x Recknagel Weaver Bases - Mauser M96/M97 [..-3097]1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)1 x Contessa Picatinny Rail - Howa 1500 Short (20 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail
Manufacturers
Useful Information