Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff "K" Denim Cap - Grey2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Navy Gun Slip1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Anschütz Biathlon Harness1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit2 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Krieghoff Extended Pillars for Adjustable Comb1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]2 x K-80 Standard Trigger - Gold Titanium2 x K-80 Forward Position Trigger - Black Titanium1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x K-80 Standard Trigger - Titanium1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Steel Stock Trap Door3 x Krieghoff Sight Bead Blanking Screw1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Recknagel Front Sight Bead White [11442-0300]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]2 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)2 x Recknagel Leaf Sight 19mm [15235-3019]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Grip Cap Compartment1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Brass Mid Sight Bead1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff Factory Hanger Pin1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails4 x Jones Thru-the-Pad Adjuster1 x Schultz & Larsen Torx Key for Scope Mounts1 x Jones Gun Nut Kit1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Spare Tri-Nut Wrench 00088-00862 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Briley 20b Speed Wrench - For Krieghoff1 x WalkStool Spare Leg Joints1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Blank 12mm Eurorail - 150mm2 x AimZonic Compact Camo Sound Moderator1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x WalkStool Set of Spare Red Spring1 x Contessa CZ 527 Euro Rail for Quick Release Mount2 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Quick Release Mount for Swarovski Rail1 x ERATAC Bubble Level [T0940-0002]2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x Gerber Paraframe II Fine Edge Knife1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)2 x Krieghoff Comb Wrench (T-Handle)2 x Krieghoff Trigger & Selector Locking Wrench1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body3 x K-80 Forward Position Trigger - Gold Plated1 x Gerber Powerframe Knife1 x Krieghoff Safety Catch Locking Screw Wrench1 x K-80 Stock Weight for Balance System1 x Gerber Bullrush Tactical Multi-Tool1 x Starkie Blue (A.K.A Smurf Poo)1 x Gerber Gator Combo Replacement Saw2 x Clearance Americase Cordura Case Cover (32x11x3")1 x Silva Pavé Sport Bike Light White/Black1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Krieghoff 2009 Badge (Collectors Badge)1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Woven Fabric Patch1 x Krieghoff "K" Denim Cap - Navy1 x Silva Dine Duo Kit - Turquoise/White1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Krieghoff 2013 Badge (Collectors Badge)2 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Bauer ED 8x50 Binoculars1 x Krieghoff Stock Removal Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Krieghoff Achievement Badge 25 Straight1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x LED Lenser Intelligent Filter Set with Holster1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x CR2032 Camelion Lithium Battery1 x Gerber GDC Zip Blade1 x Jones Original Pad Adjuster1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x K-80 Forward Position Trigger - Steel1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x K-80 Barrel Weight Balance System1 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - Howa 1500 Short (20 MOA)1 x Recknagel Super Express 1 Leaf Sight [15400-3025]
Manufacturers
Useful Information