Contessa QD Ring Mount for Blaser R8/R93

£375.13
20% VAT incl.

Available Options

  • Model:SBB00+RINGS
Contessa Quick Release Ring Mount for Blaser

Rail Length - 137mm
Height (BH) - 12.5mm (This scope height with Contessa Low Rings measure the same as the Blaser mount with the low rings)
Distance Between Rings - 80mm or 65mm
Weight - 221g
Fits Models: - R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 2 x Rings of your Choice
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

The quick release ring mount, available with 25.4mm, 30mm, 34mm or 36mm rings and three heights, low, medium or high. The scope height with the low ring is identical to the Blaser mount with the low ring. The Contessa mount has windage adjustment if required and is locked/released with a single side lever that works on both lugs at the same time. The quality and finish of the mount is extremely high. Return to zero is guaranteed.

The Rings have two positions. The maximum position allows a distance of 80mm between the rings, whereas the minimum is 65mm.

Ring Options:
- 1 Inch (25.4mm), Low, 2.5mm (15mm Total BH)
- 1 Inch (25.4mm), Medium, 5.0mm (17.5mm Total BH)
- 1 Inch (25.4mm), High, 7.5mm (20mm Total BH)
- 30mm, Low, 2.5mm (15mm Total BH)
- 30mm, Medium, 5.0mm (17.5mm Total BH)
- 30mm, High, 7.5mm (20mm Total BH)
- 34mm, Medium, 6.5mm (19mm Total BH)
- 34mm, High, 8.0mm (20.5mm Total BH)
- 36mm, Medium, 5.0mm (17.5mm Total BH)
- 40mm, Medium, 6.0mm (18.5mm Total BH)

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in a matter of seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Spares Kit1 x Krieghoff Navy Gun Slip1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Grip Cap Compartment2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Gerber GDC Zip Blade1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Adaptor for VFG Rods Brass2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Contessa Picatinny Rail - Remington 700 Long (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud
Manufacturers
Useful Information