Contessa QD Rear Extended Picatinny Rail Mount for Blaser

£375.13
20% VAT incl.


  • Model:SBB03/R
Contessa Rear Extended Picatinny Rail for Blaser
Quick Release (QD) Rail Mount including Rear Picatinny Rail for Blaser


Rail Length: 190mm
Height without Rail (BH): 12.5mm
Height with Rail (BH): 19.5mm
Extends Backwards - 98mm Back past the rear rifle clamp notch
Weight: 282g
Fits Models: R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 1 x Forward Extended Picatinny Rail (EBB02-REAR)
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

This quick release mount is an extended Picatinny Rail, suitable for night vision, allowing greater flexibility in eye relief position. This mount is supplied with a quick release base with ONLY THE REAR EXTENDED RAIL, that extends backwards towards the eye. Simple single release lever and high quality with guaranteed return to zero.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Forward Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

2 x Krieghoff Woven Fabric Patch3 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)3 x Krieghoff Navy Gun Slip2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Front Sight Bead (Small)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for VFG Rods (Spare)1 x Anschütz Biathlon Harness3 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box3 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Starkie Blue (A.K.A Smurf Poo)1 x Ebony & Brass 20 Bore Snap Caps1 x Schmierfix Grease by Liqui Moly2 x Bauer Outdoor 8x21 Binoculars2 x Jones Thru-the-Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x ERATAC Bubble Level [T0940-0002]2 x Jones Gun Nut Kit1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Schultz & Larsen Take Down Rifle Case1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Briley 20b Speed Wrench - For Krieghoff1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Spare Leg Joints1 x WalkStool Set of Spare Red Spring2 x K-80 Barrel Weight Balance System1 x K-80 Standard Trigger - Titanium3 x Krieghoff Stock Removal Wrench2 x Krieghoff Extended Pillars for Adjustable Comb2 x K-80 Stock Weight for Balance System2 x K-80 Standard Trigger - Gold Plated1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x AimZonic Compact Camo Sound Moderator2 x Krieghoff C-Clips (E-Clips)1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Standard Trigger - Steel1 x Krieghoff 28b Choke Wrench2 x AimZonic Plus Camo Sound Moderator1 x Krieghoff .410g Choke Wrench1 x K-80 Forward Position Trigger - Gold Plated2 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Factory Hanger Pin1 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Choke Multi Wrench1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Black Barrel Case (83cm Internal)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff 12b Choke Wrench1 x Krieghoff "K" Mesh Cap - Black1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Silva ex10 Distance Pedometer - White1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Krieghoff Achievement Badge 25 Straight1 x Badge - Cob Bronze1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Gerber Basic Fixed Blade Serrated1 x AA x 4 Camelion Plus Alkaline Batteries1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Recknagel SOB01 Silencer (Standard Thread)1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x EX Demo - Gerber Metolius Pocket Folder
Manufacturers
Useful Information