Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x K-80 Barrel Weight Balance System2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Sight Bead Blanking Screw2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)2 x Krieghoff Spares Kit1 x Krieghoff 12b Choke Wrench1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Brass Mid Sight Bead1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Bear Grylls Ultra Compact Knife1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)
Manufacturers
Useful Information