Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Krieghoff "K" Denim Cap - Grey3 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)3 x Parker Hale Thread to 8-32 Thread Converter3 x Krieghoff Spares Kit3 x Krieghoff Trigger Screw2 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Sauer 200 Long (10 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Navy Gun Slip2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)2 x Krieghoff Brass Mid Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x K-80 Stock Weight for Balance System1 x Black Barrel Case (83cm Internal)1 x ERATAC Bubble Level [T0940-0002]2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Jones Gun Nut Kit1 x Krieghoff "K" Logo Cap Black & White2 x Schmierfix Grease by Liqui Moly1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Ebony & Brass 20 Bore Snap Caps1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x AimZonic Plus Camo Sound Moderator2 x K-80 Barrel Weight Balance System1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Sight Bead Blanking Screw1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x K-80 Forward Position Trigger - Titanium1 x Gerber Metolius Pocket Folder1 x Bauer HD 8x42 Binoculars1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Bear Grylls Compact Multi-Tool by Gerber1 x Krieghoff Stock Removal Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Briley 20b Speed Wrench - For Krieghoff1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Extended Pillars for Adjustable Comb1 x Bear Grylls Scout Essentials Kit1 x Krieghoff .410g Choke Wrench1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Bear Grylls Ultra Compact Knife1 x K-80 Standard Trigger - Gold Titanium1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Krieghoff Trigger & Selector Locking Wrench1 x CR2032 Camelion Lithium Battery1 x Schultz & Larsen Torx Key for Scope Mounts1 x Krieghoff 12b Choke Wrench1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Spare Ring-to-Base Screws1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Recknagel Front Ramp [12000-0000]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Krieghoff Safety Catch Locking Screw Wrench1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Jones Original Pad Adjuster1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail
Manufacturers
Useful Information