Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]3 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip4 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights4 x Krieghoff HIVIZ Pro Sights2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)3 x Schmierfix Grease by Liqui Moly3 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Krieghoff "K" Denim Cap - Grey2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)3 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Spares Kit2 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable2 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)3 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)4 x VFG Barrel Cleaning Felts for .44 (Box of 250)4 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Sight Bead Blanking Screw1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Contessa Picatinny Rail - Sako S20 (0 MOA)2 x Jones Gun Nut Kit2 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x AimZonic Compact Camo Sound Moderator3 x Ziegler Quick Release Mount for Blaser - Swarovski Rail3 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel SOB3D Silencer (Standard Thread)1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff Stock Removal Wrench1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for VFG Rods Brass1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Complete Set for .1771 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x K-80 Standard Trigger - Steel2 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff .410g Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Recknagel Front Ramp [12000-0000]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]3 x Krieghoff 12b Choke Wrench2 x Custom Rifles of Great Britain by Bruce Potts1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)2 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x K-80 Standard Trigger - Titanium1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Black Barrel Case (83cm Internal)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Black Leather Shell/Cartridge Pouch1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x AA x 4 Camelion Plus Alkaline Batteries1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Gerber Metolius Pocket Folder1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Extended Rail Remington 700 Short [57250-0012]1 x Recknagel Picatinny Rail 204mm Blank, Alu [..0120]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel Picatinny Rail Browning Maral, Steel [..002J]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x LED Lenser Intelligent Filter Set with Holster1 x Krieghoff Factory Hanger Pin1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x WalkStool Spare Leg Joints2 x WalkStool Set of Spare Red Spring1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Quick Release Mount for Swarovski Rail1 x Walkstool Steady1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser
Manufacturers
Useful Information