Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)
Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)
£88.91
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x Bear Grylls Ultra Compact Knife2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Gerber Balance Multi-Tool Black1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]2 x Krieghoff "K" Collectors Badge1 x Gerber Gator Combo Replacement Saw1 x Recknagel Grip Cap Skeleton Domed [24060-2100]1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]2 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]2 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA) Extended1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Badge - Cob Bronze1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x EX Demo - Gerber Metolius Pocket Folder1 x Recknagel Picatinny Rail Savage Long 20 MOA, Alu [..2193]1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)
£7,663.66
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA) Recknagel Picatinny Rail Sako Short, Alu [..0014] Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]