Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Anschütz Biathlon Harness1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Krieghoff Navy Gun Slip1 x Recknagel Zeiss Rail 45º Components - 6mm BH3 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x AimZonic Plus Camo Sound Moderator1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]2 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel Grip Cap Domed Blank [24000-0400]2 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]3 x Recknagel Front Sight Bead Red [11444-0300]2 x Recknagel 16mm Dovetail Ring Mounts 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel 36mm Ring Components - 5mm BH2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]2 x Recknagel SOB3D Silencer (Standard Thread)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Extended Rail Remington 700 Long [57250-0112]2 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Custom Rifles of Great Britain by Bruce Potts1 x Jones Original Pad Adjuster2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Parker Hale Thread to 8-32 Thread Converter1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Black Barrel Case (83cm Internal)1 x Recknagel Stock Shield - 3 Point Shield Contoured1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Krieghoff K-Diamond Beanie - Navy1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Recknagel Weaver Bases - Remington 7400 [..-3013]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Recknagel Weaver Bases - Swiss Arms SHR-970 [..-3040]1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Recknagel Weaver Bases - Winc. 88 / 100 [..-3086]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Picatinny Rail Winchester Mod.70 Long, Alu [0124]1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Gerber Myth Series Fixed Saw1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Picatinny Riser Mount Block (QD)1 x Recknagel Weaver Bases - Heym SR 40 [57080-3041]1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Krieghoff Brass Front Sight Bead1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Gerber GDC Zip Blade1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff "K" Logo Cap Navy & White1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)
Manufacturers
Useful Information