Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x CR2032 Camelion Lithium Battery1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Schmierfix Grease by Liqui Moly1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Black Barrel Case (83cm Internal)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel SOB3D Silencer (ERA LOC)1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel SOB3D Silencer (Standard Thread)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Parker Hale Thread to 8-32 Thread Converter1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC Bubble Level [T0940-0002]1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Tikka T1 Euro Rail for Quick Release Mount2 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Gerber Balance Multi-Tool Black1 x Gerber Basic Fixed Blade Serrated1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]2 x Gerber Myth Series Fixed Saw1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Badge - Cob Bronze1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Gerber New Myth Series Pocket Folder1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Jones Thru-the-Pad Adjuster1 x Gerber Metolius Pocket Folder1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Gerber Paraframe II Fine Edge Knife1 x Ex-Display Gerber GDC Zip Hex1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Jones Original Pad Adjuster1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber Dime Multi-Tool (Lime)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x Contessa Quick Release Picatinny Rail1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062]1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Mauser M12, Alu [..002L]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Winchester 70 X-Long (0 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II
Manufacturers
Useful Information