Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Pull Through Pocket Set for .22 Upwards3 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Weaver Rings 30mm, 7mm BH, Steel2 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Contessa Quick Release Mount for Swarovski Rail1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Steel [..2112]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - Winchester 70 Long (10 MOA)2 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Krieghoff Achievement Badge 100/3001 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)2 x Krieghoff 2011 Badge (Collectors Badge)1 x Recknagel Picatinny Rail Mauser M18, Steel, 20 MOA [..202X]1 x Contessa Picatinny Rail - Howa 1500 Long (0 MOA)1 x Recknagel Picatinny Rail Mauser M12, 20 MOA, Steel [..202L]2 x Recknagel Front Sight Bead White [11442-0300]1 x Krieghoff 2015 Badge (Collectors Badge)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Krieghoff 2012 Badge (Collector's Badge)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - Remington 700 Long (10 MOA)1 x Krieghoff Achievement Badge 25 Straight1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)
Manufacturers
Useful Information