Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Krieghoff Sight Bead Blanking Screw2 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Custom Rifles of Great Britain by Bruce Potts1 x Black Barrel Case (83cm Internal)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Starkie Blue (A.K.A Smurf Poo)1 x Ebony & Brass 20 Bore Snap Caps1 x Black Leather Shell/Cartridge Pouch1 x Schmierfix Grease by Liqui Moly1 x Walkstool Steady1 x WalkStool Spare Leg Joints1 x WalkStool Set of Spare Red Spring1 x WalkStool Comfort 65 (65cm/26in)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Woven Fabric Patch2 x Jones Thru-the-Pad Adjuster2 x Jones Original Pad Adjuster1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Extended Pillars for Adjustable Comb1 x K-80 Barrel Weight Balance System1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x K-80 Stock Weight for Balance System1 x Krieghoff "K" Collectors Badge1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff Stock Removal Wrench1 x Teague Precision Choke Key1 x Krieghoff Comb Wrench (T-Handle)
Manufacturers
Useful Information