K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff Shell Bag1 x Bear Grylls Paracord Fixed Blade2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)2 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Pull Through Pocket Set for .22 Upwards2 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount3 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff "K" Logo Cap Black & White1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Silva Dine Duo Kit - Purple/White1 x VFG Complete Set for .1771 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x Recknagel Picatinny Rail Mauser M18, Alu, 20 MOA [..202X]1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x K-80 Standard Trigger - Steel1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x ERATAC M-Lok Adaptor for Harris Bipod [T5390-0005]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13551 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Jones Gun Nut Kit1 x K-80 Forward Position Trigger - Steel1 x Jones Thru-the-Pad Adjuster1 x Gerber Gator Combo Replacement Saw1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Gerber Myth Series Fixed Saw1 x K-80 Standard Trigger - Gold Titanium1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC M-Lok Picatinny Rail, 9 Slots [T5909-0008]1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Titanium1 x Jones Original Pad Adjuster1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x ERATAC M-Lok Picatinny Rail, 7 Slots [T5907-0008]1 x K-80 Standard Trigger - Gold Plated1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x K-80 Standard Trigger - Black Titanium1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Titanium1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor
Manufacturers
Useful Information