K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Schmierfix Grease by Liqui Moly2 x Krieghoff Spares Kit1 x Krieghoff Comb Wrench (T-Handle)2 x Jones Original Pad Adjuster2 x Jones Thru-the-Pad Adjuster2 x Krieghoff Brass Front Sight Bead1 x Krieghoff Extended Pillars for Adjustable Comb1 x K-80 Barrel Weight Balance System2 x Jones Gun Nut Kit1 x K-80 Stock Weight for Balance System1 x Krieghoff Stock Removal Wrench1 x Krieghoff Woven Fabric Patch1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Schultz & Larsen Professional Bipod by Spartan1 x Black Barrel Case (83cm Internal)1 x Custom Rifles of Great Britain by Bruce Potts1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Pro Choke Box2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Standard Trigger - Titanium1 x K-80 Forward Position Trigger - Black Titanium2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x K-80 Standard Trigger - Gold Titanium1 x Anschütz Biathlon Harness1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x K-80 Standard Trigger - Steel2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x K-80 Forward Position Trigger - Gold Titanium1 x Black Leather Shell/Cartridge Pouch1 x Ebony & Brass 20 Bore Snap Caps1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints1 x Walkstool Steady1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Trigger Screw2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff HIVIZ Pro Sights1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey
Manufacturers
Useful Information