K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff "K" Logo Cap Black & White3 x Krieghoff Factory Hanger Pin1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x ERATAC Bubble Level [T0940-0002]2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Krieghoff Brass Front Sight Bead1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Bauer HD Series 8x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Gold Titanium1 x MSA Sordin - Hygiene Kit - Foam Seals1 x K-80 Standard Trigger - Titanium1 x K-80 Standard Trigger - Gold Plated1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Extended Pillars for Adjustable Comb2 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Ejector Ball and Spring1 x K-80 Stock Weight for Balance System1 x Krieghoff Stock Removal Wrench1 x Krieghoff Trigger Screw1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff 12b Choke Wrench1 x K-80 Barrel Weight Balance System1 x Krieghoff Brass Mid Sight Bead
Manufacturers
Useful Information