Krieghoff Pad Adjuster Unit (Pre Fitted)

£350.00
20% VAT incl.

Available Options

  • Model:K-PAD-ADJ-PF
The Krieghoff Pad Adjuster (Pre-Fitted)
This unit comes either with or without a pad, but the unit does not need fitting.

The Pad Adjuster Unit (Pre-Fitted) has been pre-fitted to K-80 Trap Special Stock Dimensions. It will not fit any other stock other than Trap Special.

Note: This part will require ordering from Krieghoff, Germany. Delivery will be between 5-10 days

This Adjuster allows you to manoeuvrer the butt plate in a variety of different ways to suit you. The recoil pad is not included with this adjuster unit, but you can select to have a recoil pad with for an additional price. The different pad options are below. The pad is aligned and adjusted in several different ways to give you the perfect fit while shooting. There is the option to lengthen the stock by using spacers, which will work with the Krieghoff pad available. You can choose to fit your own pad to the unit, such as a Kick-Eez pad, which does mean that the spacers used with the unit will not then fit the pad.

The possible adjustments allow you to set the following:

Adjust:
- Heel In/Out
- Toe In/Out
- Lateral Adjustment
- Drop
- Pitch

Dimensions:
Height - 132mm
Width - 45mm
Thickness of Unit - 19mm (without Pad)
Thickness of Unit - 42mm (with Krieghoff Pad)

You can use additional spacers to lengthen the unit. The spacers do only work with the Krieghoff Pad, so if you are fitting your own pad, such as a Kick-Eez pad, then the spacers will not be compatible.
Thickness of Spacer - 6.4mm

For details on fitting and the possible adjustments available,
please view the Krieghoff Adjustable Pad Manual

Options for this Adjuster Unit.
You can select from the options below to have the Pad Adjuster Unit (Pre-Fitted) without a recoil pad, or with a recoil pad for additional cost.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Spares Kit1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Teague Precision Choke Key1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Brass Front Sight Bead1 x Krieghoff HIVIZ Pro Sights1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff Front Sight Bead (Standard)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Ejector Ball and Spring1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Navy Canvas Gun Slip1 x Bauer HD Series 8x25 Binoculars
Manufacturers
Useful Information