K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Spares Kit1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Teague Precision Choke Key1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Brass Front Sight Bead1 x Krieghoff HIVIZ Pro Sights1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff Front Sight Bead (Standard)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Ejector Ball and Spring1 x Bauer Outdoor 10x25 Binoculars
Manufacturers
Useful Information