K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
  • Quantity in stock:No Stock - 0
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Barrel Cleaning Felts for .22 (Box of 80)3 x Contessa Picatinny Rail - Sako S20 (20 MOA)3 x VFG Complete Set for .1771 x VFG Wipe Length Stopper & Guide for Rifles2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Shell Bag1 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended3 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff "K" Bobble Beanie - Royal Blue1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Grey1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu2 x Krieghoff C-Clips (E-Clips)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Silva Dine Duo Kit - Purple/White1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x K-80 Forward Position Trigger - Black Titanium2 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Black Barrel Case (83cm Internal)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Krieghoff 12b Choke Wrench1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Adaptor for VFG Rods Brass1 x Bear Grylls Pocket Tool1 x Starkie Blue (A.K.A Smurf Poo)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes
Manufacturers
Useful Information