K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Brass Mid Sight Bead2 x Krieghoff Front Sight Bead (Small)2 x Krieghoff Factory Hanger Pin2 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Ejector Ball and Spring3 x Krieghoff HIVIZ Pro Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)4 x Krieghoff Brass Front Sight Bead1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Jones Gun Nut Kit2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Jones Original Pad Adjuster1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Jones Thru-the-Pad Adjuster1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Trigger Screw2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x K-80 Barrel Weight Balance System1 x Anschütz Biathlon Harness1 x Krieghoff Stock Removal Wrench1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Stock Weight for Balance System1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Comb Wrench (T-Handle)
Manufacturers
Useful Information