Schultz & Larsen Slide & Lock for Zeiss Rail, Med (11mm BH)

£210.00
20% VAT incl.

Available Options

  • Model:SL60ZR
Schultz & Larsen Slide & Lock Mounts for
Zeiss Rail - Medium (11mm Base Height)

45ยบ Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process. Will fit Zeiss Scopes with the Zeiss Rail fitting.

Total Weight of Both Mounts - 122g
Base Height (BH) - 11mm
Code Ref: SL60ZR

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x Recknagel Picatinny Bases - Schultz & Larsen1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Picatinny Rail Mauser M12, Alu [..002L]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff HIVIZ Pro Sights1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm
Manufacturers
Useful Information