Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Anschütz Biathlon Harness1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff "K" Denim Cap - Navy1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]2 x ERATAC 56mm Ring with UNI-Interface [03680-5757]2 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]2 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Krieghoff 12b Choke Wrench1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa QD Mount for Blaser for ATN X-Sight II2 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Logo Cap Navy & White1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff "K" Logo Cap Black & White1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC ACI Bubble Level [T0940-0000]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Jones Original Pad Adjuster1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)2 x AimZonic Compact Camo Sound Moderator1 x Jones Gun Nut Kit1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Recknagel Picatinny Rail Marlin 1894, Alu [..001V]1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Bauer HD 8.5x50 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x WalkStool Comfort 65 (65cm/26in)2 x Gerber Basic Fixed Blade Serrated1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Recknagel Masterpiece Banded Front Ramp [12520-0180]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Krieghoff 28b Choke Wrench1 x VFG Complete Set for .1771 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel 34mm Ring Components - 5mm BH2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff .410g Choke Wrench1 x Bauer HD Series 8x25 Binoculars1 x Jones Thru-the-Pad Adjuster1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x WalkStool Set of Spare Red Spring1 x Hi Viz - How to Become a Better Shooter1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Krieghoff 2013 Badge (Collectors Badge)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Gerber Paraframe II Fine Edge Knife2 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Krieghoff "K" Denim Cap - Grey1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Silva Dine Duo Kit - Turquoise/White2 x Krieghoff Woven Fabric Patch1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Krieghoff Brass Mid Sight Bead1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)
Manufacturers
Useful Information