K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)3 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff C-Clips (E-Clips)2 x ERATAC Bubble Level [T0940-0002]2 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Krieghoff 28b Choke Wrench2 x Krieghoff Stock Removal Wrench1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Extended Pillars for Adjustable Comb1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Briley 20b Speed Wrench - For Krieghoff1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus3 x Krieghoff Woven Fabric Patch2 x Schmierfix Grease by Liqui Moly1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff Front Sight Bead (Standard)2 x Krieghoff Navy Gun Slip1 x Recknagel SOB3D Silencer (ERA LOC)2 x Krieghoff Brass Front Sight Bead1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x K-80 Forward Position Trigger - Gold Plated1 x Krieghoff Sight Bead Blanking Screw1 x Ebony & Brass 20 Bore Snap Caps2 x K-80 Forward Position Trigger - Black Titanium1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff K-Diamond Beanie - Grey1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x K-80 Standard Trigger - Titanium1 x Gerber Myth Series Fixed Saw2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff K-80 Badge "K-80 Sport" Logo2 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]3 x Krieghoff Spares Kit1 x AimZonic Plus Camo Sound Moderator1 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Comb Wrench (T-Handle)1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff Brass Mid Sight Bead1 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff "K" Collectors Badge1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Factory Hanger Pin1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Black Leather Shell/Cartridge Pouch1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x K-80 Standard Trigger - Black Titanium1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Krieghoff "K" Logo Cap Black & White1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Gerber GDC Zip Blade1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]
Manufacturers
Useful Information