Krieghoff Black Titanium Hanger, Choke Tube Barrels

£230.00
20% VAT incl.

Available Options

  • Model:BTH


The Black Titanium Hanger

Please Note: The Black Titanium Hanger is available to purchase with an estimated 7-10 day delivery time

Black Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Black Titanium Choke Tubes the difference in handling is noticeable.

Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£15.00
20% VAT incl.
1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff HIVIZ Pro Sights1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Parker Hale Thread to 8-32 Thread Converter1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger Screw1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Woven Fabric Patch1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Brass Front Sight Bead1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x LED Lenser Intelligent Filter Set with Holster1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Krieghoff Front Sight Bead (Standard)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Quick Release Mount for Zeiss Rail1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Gerber Basic Fixed Blade Serrated1 x Contessa Quick Release Mount for Swarovski Rail1 x Gerber Metolius Pocket Folder
Manufacturers
Useful Information