Krieghoff Gold Titanium Hanger, Choke Tube Barrels

£255.00
20% VAT incl.

Available Options

  • Model:GTH


The Gold Titanium Hanger

Please Note: We carry a limited number of Gold Titanium Hangers in stock. If it is not available to purchase, we estimate a 7-14 day delivery time

Gold Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Gold Titanium Choke Tubes the difference in handling is noticeable. Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Trigger Screw1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Bauer ED 8x42 Binoculars1 x Krieghoff Front Sight Bead (Small)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff 12b Choke Wrench1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff Spares Kit1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x K-80 Barrel Weight Balance System1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Jones Gun Nut Kit
Manufacturers
Useful Information