K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)3 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Krieghoff HIVIZ Pro Sights1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Krieghoff Spares Kit2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)4 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff Brass Front Sight Bead2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Schultz & Larsen Take Down Rifle Case1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Steel Stock Trap Door2 x Krieghoff "K" Mesh Cap - Black3 x Krieghoff Sight Bead Blanking Screw1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Black Leather Shell/Cartridge Pouch1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Walkstool Steady1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Factory Hanger Pin1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Jones Thru-the-Pad Adjuster1 x Anschütz Biathlon Harness1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x K-80 Standard Trigger - Steel1 x Clearance Americase Cordura Case Cover (32x11x3")1 x K-80 Forward Position Trigger - Steel1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Woven Fabric Patch1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Pro Choke Box1 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Trigger Screw1 x K-80 Forward Position Trigger - Titanium1 x AimZonic Plus Camo Sound Moderator1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Achievement Badge 25 Straight1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Ebony & Brass 20 Bore Snap Caps1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Custom Rifles of Great Britain by Bruce Potts1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Recknagel Front Ramp [12000-0000]1 x WalkStool Spare Leg Joints1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff 12b Choke Wrench1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff "K" Logo Cap Navy & White1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Schmierfix Grease by Liqui Moly
Manufacturers
Useful Information