Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Jones Thru-the-Pad Adjuster1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Schultz & Larsen Take Down Rifle Case2 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel Stock Shield - 2 Point Shield Flat1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Krieghoff Brass Front Sight Bead1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel 36mm Ring Components - 5mm BH1 x Recknagel SOB3D Silencer (ERA LOC)1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Grip Cap Compartment1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x WalkStool Set of Spare Red Spring1 x Recknagel Steel Stock Trap Door1 x Recknagel Grip Cap Skeleton Domed [24060-2100]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Walkstool Steady1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]
Manufacturers
Useful Information